Guide To Ghost Immobiliser 2: The Intermediate Guide For Ghost Immobiliser 2

Ghost Immobiliser 2

Protects your vehicle from key cloning and stops thieves from driving it with your original keys. Our most recent immobiliser is connected to the CAN data network in your vehicle and a unique PIN has to be entered to begin the engine.

Ghost, unlike trackers, doesn't emit radio frequency signals and cannot be detected by diagnostic tools. Ghost does not have LED indicators or buttons that could indicate its presence in your car or van.

Anti-key cloning

The ghost immobiliser; Read the Full Posting, is created to fight key hacking and cloning. The device connects to your vehicle's CAN data network and creates a unique pin code sequence that is activated by pressing the buttons that are factory-installed on your dashboard as well as the steering wheel. This prevents thieves from being able to start your vehicle. If the wrong PIN is entered, it will stop the engine from starting which makes it impossible to leave with your joy and pride.

A ghost immobiliser is a new technology that is extremely difficult for thieves to beat. Unlike physical deterrents like wheel locks and steering locks which can be cut or jacked The ghost immobiliser is a discreet electronic device that cannot be recognized by ordinary thieves, as it doesn't emit radio signals and is completely silent.

The new generation of immobiliser is capable of protecting your vehicle from a range of threats, including key-hacking, cloned keys and relay attacks. It can also stop the thief from adding a key or replacing your ECU since it will not allow them to start your car without first entering the correct PIN code.

Contrary to other immobilisers, the ghost immobiliser 2 does not require a key fobs or remotes in order to operate. It is able to be deactivated from the driver's phone by using a simple app. This is ideal the time you have to give your car to valet parking, or for servicing without the key fobs.

The autowatch ghost immobiliser cost Ghost-II is the latest evolution of our ground-breaking ghost immobiliser. It is designed to be as simple and easy to use as is possible, yet remains as secure as ever. This is accomplished by linking the Ghost-II into the vehicle's data network CAN, which means there aren't any additional wires to hide or be easily found. It comes with a built-in feature which allows users to disable the Ghost-II simply by connecting to the vehicle's Bluetooth.

OBD port hacking

OBD port hacking is the most recent method employed by professional car thieves. Thieves are able to access your vehicle's OBD port with no more than an laptop, an app, and a few cables, which can be purchased online for less than PS50. Once they have access to your vehicle's OBD port, they will be able to do whatever they like, from setting fault codes, and tuning your vehicle to taking away your pride and joy in just a few seconds.

If you have a Ghost immobiliser, it can protect your vehicle from theft using this method by making sure that a unique PIN code sequence is entered alongside your key fob in order to start the engine and then drive away. It communicates with the vehicle's ECU (Engine Control Unit), using the CAN Data Circuit. This is completely undetectable by any scanning technology, RF or code grabbing. It even has a Service/Valet mode which allows your vehicle to be started without the need for a PIN.

To utilize an OBD hacking device, you'll need to have an operating system that is capable of interpreting the OBD protocol. These can be purchased for under PS100 on eBay or Amazon. You will also need cables with OBD pins that are connected to the CAN bus, these are available on eBay and Amazon for about PS50. The cable has to be connected to the wiring harness of your car, for example the radio wiring harness.

Once the hacker has gained access to the OBD port on your vehicle, they will send diagnostics to the system using high baud rates that will cause a crash of the car's CAN, and prevent the systems from working. This could cause your car's engine to stop or stop working.

No need to purchase additional remotes or key fobs

A car immobiliser is a great piece of anti theft technology that is used by millions of modern vehicles around the world. Utilizing engine ECU software to prevent cars from beginning if a false transponder signal is transmitted to it an aftermarket immobiliser can be an excellent way to safeguard your vehicle.

It is possible for a criminal, if they have the code to disable an immobiliser, to disable it. A burglar can easily remove the battery from many key fobs by prying them open. They could then employ an easy tool to remove the circuit board inside an immobiliser and replace it with a blank. They will then be capable of starting your car.

The TASSA approved Ghost 2 is an immobiliser that does not require any additional keys or remotes. The immobiliser communicates with engine ECU (Engine Control Unit) via a subtle and silent CAN data circuit that is undetectable with diagnostic tools, such as the ones employed by high-tech thieves. It doesn't come with a traditional keyfob that has an LED indicators, which means it's inaccessible.

You may have to turn off Autowatch's Ghost 2 automatic protection at certain times like during valet parking or a service job. The ghost CAN immobiliser comes with a specific mode for this, referred to as 'Service Mode which is activated by the touch of an app on your phone. The car is still operated however its maximum speed will be restricted to 36mph for greater security.

If you'd like to know more about the TASSA accredited ghost immobiliser, contact us now to schedule an appointment in our workshop. A member of our team will explain how the system works and provide you with your Ghost 2 emergency card, installation certificate, and security guarantee.

Simple PIN code Change Process

Ghost is a next generation device that protects your vehicle without cutting wires or putting in aftermarket key fobs. It connects directly to the vehicle's CAN data network. A personal PIN can be created using buttons on the steering wheel and dash. The system stops engine start and can't be bypassed because no RF signals are generated from the device. This makes it unrecognisable by sophisticated scanning or code grabbing technologies that modern thieves use.

The PIN code sequence can be altered whenever you wish to block previous drivers and even includes an override code incase of a sequence that is not remembered. When installing the installer will show how much is a ghost immobiliser to do this. The system also has the valet mode feature that can be used to temporarily disable the pin input sequence to allow your garage or mechanic can service the vehicle without needing to know the pin code. This is ideal for customers who want to give their car for valet parking or service but don't want to divulge the pin sequence.

Ghost is an unobtrusive system that utilizes the buttons on your vehicle to create a unique and interchangeable PIN sequence. This sequence is entered via the app on your smartphone. There are no additional LED indicators are thrown, and your car is protected without possibility of being disabled.

Tested for every vehicle

Unlike key fobs that require you to press buttons on them, a ghost immobiliser and tracker immobiliser is discreetly installed under the dash or steering wheel so that only you know it's there. The device is connected to your vehicle's CAN data network and the personalised PIN code is programmed into it using existing buttons on your car. The system won't permit your car to start until the code is entered. This means that thieves are unable to copy the keys to your car or use the OBD to hack into it.

Ghost is a great option for all vehicles, including electric cars, vans, motorhomes and bikes. It's also extremely versatile and can be programmed to deactivate in a variety of situations. For instance, it can be programmed to go into Valet mode when the vehicle is being taken to a valet park or service company. This means that your vehicle can be operated within a set 30mph speed limit, and the ghost immobiliser will be activated when it is returned to your property.

The device can also be reset at any time to your personal PIN number. This is a great option if you lose the code or when the device ceases to function.

The device is also completely undetectable by anyone who doesn't know about it is. It does this by running through the buttons on your dashboard and steering wheel and analyzing the data it sends to identify the button that was pressed. This makes it a safe and solid security system that is not able to be tampered through RF scanning or jamming, or a door lock pick set.